Mfarver: Used AI to make list of recommended tools/template

2026-04-01T18:07:02Z

Used AI to make list of recommended tools/template

New page

= 3D Printing Area =

'''⚠️ SAFETY GLASSES REQUIRED WHEN REMOVING SUPPORTS OR POST-PROCESSING ⚠️'''

----

== Desired Tools ==
Tools and equipment we would like to acquire for this area.

=== FDM / FFF Printers ===
* Enclosed FDM Printer - For ABS/ASA and temperature-sensitive prints
* Large Format Printer - 300mm+ build volume
* Multi-Material Printer - For supports or multi-color
* High-Speed Printer - For rapid prototyping

=== Resin Printers ===
* MSLA Resin Printer - For detailed prints
* Large Format Resin Printer
* Wash and Cure Station

=== Support Equipment ===
* Filament Dry Box / Dehydrator
* Enclosure with ventilation
* Air Filtration - HEPA + activated carbon
* UPS / Battery Backup

=== Post-Processing ===
* Heat Gun
* Soldering Iron - For smoothing and repairs
* Rotary Tool (Dremel)
* Sandpaper and Files
* Spray Booth - For painting

== Tools We Own ==

=== FDM / FFF Printers ===

{| class="wikitable"
|-
! Item !! Model !! Specifications !! Safety Training Required !! Owner's Manual
|-
| ''Example: FDM Printer'' || ''Prusa MK4'' || ''250x210x220mm, direct drive'' || ''Yes'' || ''[https://example.com/manual Link]''
|-
| ''Example: FDM Printer'' || ''Bambu Lab X1 Carbon'' || ''256x256x256mm, enclosed, AMS'' || ''Yes'' || ''[https://example.com/manual Link]''
|-
| ''Example: Large Format'' || ''Creality CR-10'' || ''300x300x400mm'' || ''Yes'' || ''[https://example.com/manual Link]''
|-
| || || || ||
|}

=== Resin Printers ===

{| class="wikitable"
|-
! Item !! Model !! Specifications !! Safety Training Required !! Owner's Manual
|-
| ''Example: MSLA Printer'' || ''Elegoo Saturn 3'' || ''218x123x250mm, 12K resolution'' || ''Yes - Mandatory'' || ''[https://example.com/manual Link]''
|-
| ''Example: Wash & Cure'' || ''Anycubic Wash & Cure Plus'' || ''192x120x290mm capacity'' || ''Yes'' || ''[https://example.com/manual Link]''
|-
| || || || ||
|}

=== Support Equipment ===

{| class="wikitable"
|-
! Item !! Model !! Specifications !! Safety Training Required !! Owner's Manual
|-
| ''Example: Filament Dryer'' || ''Sunlu S2'' || ''Dual spool, up to 70°C'' || ''No'' || ''[https://example.com/manual Link]''
|-
| ''Example: Air Filter'' || ''BOFA 3D PrintPro 3'' || ''HEPA + gas filtration'' || ''No'' || ''[https://example.com/manual Link]''
|-
| || || || ||
|}

=== Post-Processing Tools ===

{| class="wikitable"
|-
! Item !! Model !! Specifications !! Safety Training Required !! Owner's Manual
|-
| ''Example: Rotary Tool'' || ''Dremel 4000'' || ''Variable speed, flex shaft'' || ''Yes'' || ''[https://example.com/manual Link]''
|-
| ''Example: Heat Gun'' || ''Wagner HT1000'' || ''750-1000°F'' || ''Yes'' || ''[https://example.com/manual Link]''
|-
| || || || ||
|}

== Safety & Usage Information ==

=== General Safety Rules ===
* Complete training before using any printer
* Sign in/out on equipment log
* Never leave prints unattended for extended periods (especially first layer)
* Report jams, failures, and maintenance issues
* Clean up after your print job

=== FDM Printer Safety ===
* '''Hot surfaces''' - Nozzle reaches 250°C+, bed reaches 100°C+
* Do not touch nozzle or heated bed during or immediately after printing
* Allow parts to cool before removing from bed
* Use scraper carefully to avoid injury
* Keep flammable materials away from printer
* Ensure adequate ventilation, especially for ABS/ASA

=== Resin Printer Safety ===
* '''Nitrile gloves are MANDATORY when handling resin'''
* '''Safety glasses required when working with resin'''
* Uncured resin is toxic and a skin sensitizer
* Work in well-ventilated area or use enclosure with extraction
* Do not pour resin down drain - cure and dispose properly
* UV light can damage eyes - never look directly at UV source
* Wash skin contact immediately with soap and water
* Keep resin away from heat and direct sunlight

=== Fume Safety ===

{| class="wikitable"
|-
! Material !! Fume Risk !! Ventilation Required
|-
| PLA || Low || Recommended
|-
| PETG || Low-Medium || Recommended
|-
| ABS || High - Styrene fumes || '''Required - Enclosed + Filtered'''
|-
| ASA || High - Styrene fumes || '''Required - Enclosed + Filtered'''
|-
| Nylon || Medium - May emit irritants || Required
|-
| Resin (all types) || High - VOCs || '''Required - Enclosed + Filtered'''
|}

=== Post-Processing Safety ===
* '''Wear safety glasses when removing supports'''
* Use dust mask when sanding
* Heat guns can cause burns - use carefully
* Sharp tools (scrapers, knives) - cut away from body
* Spray painting - use spray booth or outdoors, wear respirator

=== Material Storage ===
* Keep filament dry - use sealed containers with desiccant
* Store resin in cool, dark place
* Resin has shelf life - check expiration
* Label all materials clearly

=== Approved Materials ===

==== FDM Filaments ====
{| class="wikitable"
|-
! Material !! Enclosure Required !! Notes
|-
| PLA || No || Beginner-friendly, low odor
|-
| PETG || No || Good strength, easy to print
|-
| TPU/TPE || No || Flexible, requires slower speeds
|-
| ABS || '''Yes''' || Requires enclosure and ventilation
|-
| ASA || '''Yes''' || UV resistant, requires enclosure
|-
| Nylon || '''Yes''' || Moisture-sensitive, needs drying
|-
| PC (Polycarbonate) || '''Yes''' || High temp, requires approval
|-
| Carbon Fiber filled || No || Abrasive - use hardened nozzle only
|}

==== Resins ====
{| class="wikitable"
|-
! Resin Type !! Notes
|-
| Standard UV Resin || General purpose, good detail
|-
| Water Washable Resin || Easier cleanup, still requires gloves
|-
| ABS-Like Resin || More durable, higher shrinkage
|-
| Flexible Resin || Shore hardness varies
|-
| Castable Resin || For lost wax casting - requires approval
|}

=== Waste Disposal ===
* Failed PLA prints - can go in trash
* Failed ABS/other prints - check local recycling
* Uncured resin - cure with UV before disposal
* Resin-contaminated IPA - evaporate and cure residue, dispose properly
* Never pour resin or contaminated liquids down drain

=== Emergency Procedures ===
* Fire extinguisher location: ''[TO BE FILLED IN]''
* First aid kit location: ''[TO BE FILLED IN]''
* Emergency contact: ''[TO BE FILLED IN]''
* Eye wash station location: ''[TO BE FILLED IN]'' (required for resin area)
* Skin contact with resin: Wash immediately with soap and water
* Eye contact with resin: Flush with water for 15 minutes, seek medical attention

3D Printing - Revision history

Mfarver: Used AI to make list of recommended tools/template