LumenPNPv2: Difference between revisions
From Grand River Makerspace Wiki
| Line 60: | Line 60: | ||
| z-gantry-right || 1 || R || || [[User:Mfarver]] || | | z-gantry-right || 1 || R || || [[User:Mfarver]] || | ||
|- | |- | ||
| z-gantry-backplate-left || 1 || R || [[User:Mfarver]] | | z-gantry-backplate-left || 1 || R || || [[User:Mfarver]] || | ||
|- | |- | ||
| z-gantry-backplate-right || 1 || R || [[User:Mfarver]] | | z-gantry-backplate-right || 1 || R || || [[User:Mfarver]] || | ||
|- | |- | ||
| bottom-light-mount || 1 || R || || [[User:Chemicalivory]] || 4/18/2026 | | bottom-light-mount || 1 || R || || [[User:Chemicalivory]] || 4/18/2026 | ||
Revision as of 16:34, 18 April 2026
General Info
Placeholder for assembly information and part needed to complete the Lumen Pick and Place kit.
Machine Version, Docs, and General Links
The version we're focusing on is v2. Feeders are not included in the kit, but can be added on.
Adding Feeders
Feeder parts (NOT YET ACQUIRED):
Without purchase of the above two parts, we will be using strip feeders, which take up space where the PCB mounts.
Official Strip Feeder Info
Assembly Coordination
3D Printing Parts Sign-Up
| Model | Quantity | Req'd/Optnl | Color | Printed By | Printed On |
|---|---|---|---|---|---|
| front-left-leg | 1 | R | |||
| front-right-leg | 1 | R | |||
| back-leg | 2 | R | |||
| y-gantry | 2 | R | |||
| y-gantry-support | 2 | R | |||
| x-motor-mount | 1 | R | |||
| roller-spacer | 6 | R | User:Chemicalivory | 4/18/2026 | |
| frame-umbilical-mount | 1 | R | User:Chemicalivory | 4/18/2026 | |
| y-gantry-umbilical-mount | 1 | R | User:Chemicalivory | 4/18/2026 | |
| x-gantry-front | 1 | R | |||
| x-gantry-back | 1 | R | |||
| x-idler-mount | 1 | R | |||
| top-camera-mount | 1 | R | User:Chemicalivory | 4/18/2026 | |
| top-light-mount | 1 | R | User:Chemicalivory | 4/18/2026 | |
| extrusion-cable-clip | 1 | R | |||
| z-gantry-left | 1 | R | User:Mfarver | ||
| z-gantry-right | 1 | R | User:Mfarver | ||
| z-gantry-backplate-left | 1 | R | User:Mfarver | ||
| z-gantry-backplate-right | 1 | R | User:Mfarver | ||
| bottom-light-mount | 1 | R | User:Chemicalivory | 4/18/2026 | |
| bottom-camera-mount | 1 | R | User:Chemicalivory | 4/18/2026 | |
| foot-mount | 1 | R | |||
| foot | 1 | R | |||
| extended-foot | 0 | O | |||
| umbilical-cable-strain-relief | 1 | R | User:Chemicalivory | 4/18/2026 | |
| peek-cable-clamp | 6 | R | |||
| nozzle-rack | 1 | R | User:Chemicalivory | 4/18/2026 | |
| pump-mount | 1 | R | |||
| valve-mount | 1 | R | |||
| belt-clamp | 6 | R | |||
| belt-tension-arm | 3 | R | |||
| x-gantry-roller-carriage | 2 | R | |||
| umbilical-swivel | 1 | R | User:Chemicalivory | 4/18/2026 | |
| umbilical-swivel-extension | 1 | R | User:Chemicalivory | 4/18/2026 | |
| datum-board-mount | 1 | R | |||
| board-mount-static | 0 | O | |||
| board-mount-dynamic | 0 | O | |||
| board-suppot | 0 | O | |||
| 8mm-strip-feeder | 0 | O | |||
| 12mm-strip-feeder | 0 | O | |||
| 16mm-strip-feeder | 0 | O | |||
| 24mm-strip-feeder | 0 | O | |||
| cp40-nozzle-camera-mask | 0 | O |
