3D Printing

3D Printers

• Enclosed CoreXY Printers — Fast, versatile machines good for most work. Enclosure allows ABS/ASA in addition to PLA and PETG.
  • Bambu Lab H2D — Our flagship. Large-format (350×320×325mm), fully enclosed, dual-nozzle printer with a hardened steel 350°C hotend, 120°C bed, and active chamber heating up to 65°C. Best choice for big parts, two-material prints, and engineering filaments. 📄 Full Machine Wiki Guide →
  • Bambu Lab X1 Carbon — Fully enclosed, AMS multi-color/multi-material, lidar first-layer inspection. Great for reliable multi-color prints. 📄 Full Machine Wiki Guide →
  • Bambu Lab P1S (×3) — Enclosed CoreXY workhorses (256×256×256mm). Same Bambu Studio workflow as the X1C and H2D; fast, reliable, and easy to use for everyday prints. 📄 Full Machine Wiki Guide →
  • Elegoo Centauri Carbon (×3) — Enclosed CoreXY machines with a filtered enclosure. Fast and easy to use. 📄 Full Machine Wiki Guide →
• Snapmaker U1 — Four-toolhead toolchanger (270×270×270mm). Each head holds its own preheated filament, so multi-color/multi-material prints swap heads in seconds with almost no purge waste. Partially enclosed with no chamber heater, so stick to PLA, PETG, and TPU. Slice in Snapmaker Orca or OrcaSlicer. 📄 Full Machine Wiki Guide →
• Elegoo Orange Storm Giga — Massive-format open-frame printer (800×800×1000mm) with four independent heated PEI beds. Upgraded to the custom Open OrangeStorm operating system — it runs differently than our stock machines. ⚠️ Guidance required — see a volunteer before use. 📄 Full Machine Wiki Guide →

---

📦 In Storage

⚠️ These machines have been moved into storage for now to make room for our new printers. They are not available for member use at this time. Their wiki guides are kept here for reference.

• CreatBot F430 — Large-format, fully enclosed, heated chamber (70°C) with dual extruders reaching 420°C. For engineering materials (Nylon, PC, CF) and large industrial parts. 📄 Full Machine Wiki Guide →
• Ultimaker 3 Extended — Open-frame dual-extrusion printer with swappable print cores and auto nozzle-lifting. Uses 2.85mm filament. 📄 Full Machine Wiki Guide →
• Ultimaker S5 — Large-format dual-extrusion printer with swappable print cores, a built-in live camera, and a touchscreen interface. Uses 2.85mm filament. 📄 Full Machine Wiki Guide →