Electronics Lab
Area Manager
Steve
Tools and equipment we would like to acquire for this area.
Test & Measurement Equipment we want
- Digital Multimeter (DMM) - Voltage, current, resistance, continuity
- Oscilloscope - 4-channel, 100MHz+ bandwidth recommended
- Function/Signal Generator - Sine, square, triangle waveforms
- Bench Power Supply - Variable voltage/current, dual or triple output
- Logic Analyzer - For digital signal debugging
- LCR Meter - Inductance, capacitance, resistance measurement
- Frequency Counter
Test & Measurement Equipment we have
Soldering & Rework
- Temperature-controlled soldering stations
- Hot air rework station - For SMD components
- Solder wire - Various gauges, lead-free and leaded
- Flux and flux pens
- Solder wick and desoldering pump
- Soldering tips - Various sizes and shapes
- Fume extractor - Essential for ventilation
- Helping hands / PCB holders
- Reflow oven or hot plate - For SMD assembly
Soldering & Rework we have
| Item |
Model |
Specifications |
Page |
|
| Yihua |
862BD+ |
Hot air Soldering station |
Elec_YiHUA_862BD
|
|
|
|
|
|
- Wire strippers and cutters
- Precision screwdriver set
- Needle-nose pliers
- Tweezers - ESD-safe, various tips
- Heat gun
- Crimping tools
- IC extractor/inserter
Magnification & Inspection
- Stereo microscope - For SMD work
- Magnifying lamp
- USB microscope/camera
Prototyping
- Breadboards - Various sizes
- Jumper wire kits
- Perfboard and stripboard
- Arduino, Raspberry Pi, ESP32 dev boards
- Component assortment kits (resistors, capacitors, LEDs, transistors)
Safety & ESD Protection
- ESD mats and wrist straps
- Safety glasses
- Fire extinguisher (Class C rated)
- First aid kit
Organization & Storage
- Component bins and organizers
- Anti-static bags
- Label maker
- Parts drawers with dividers
Nice to Have
- PCB etching supplies or small CNC mill
- 3D printer - For enclosures
- Programmers - JTAG, SWD, ICSP
- Spectrum analyzer
- Thermal camera - For finding hot spots
Test & Measurement
| Item |
Model |
Specifications |
Safety Training Required |
Owner's Manual
|
| Example: Oscilloscope |
Rigol DS1054Z |
50MHz, 4-channel, 1GSa/s |
Yes |
Link
|
|
|
|
|
|
Soldering & Rework
| Item |
Model |
Specifications |
Safety Training Required |
Owner's Manual
|
| Example: Soldering Station |
Hakko FX-888D |
70W, digital temperature control |
Yes |
Link]
|
|
|
|
|
|
| Item |
Model |
Specifications |
Safety Training Required |
Owner's Manual
|
| Example: Wire Strippers |
Klein 11055 |
10-18 AWG |
No |
N/A
|
|
|
|
|
|
Magnification & Inspection
| Item |
Model |
Specifications |
Safety Training Required |
Owner's Manual
|
| Example: Stereo Microscope |
AmScope SM-4TZ |
3.5X-90X zoom |
No |
Link
|
|
|
|
|
|
General Safety Rules
- Always inspect equipment before use
- Report damaged or malfunctioning equipment immediately
- Keep work area clean and organized
- No food or drinks near equipment
Soldering Safety
- Always use fume extraction when soldering
- Allow soldering iron to cool before leaving unattended
- Use appropriate tip temperature for the job
- Wash hands after handling solder, especially leaded solder
- Keep flammable materials away from hot tools
Electrical Safety
- Never exceed voltage/current ratings of equipment
- Disconnect power before making circuit changes
- Use proper ESD protection when handling sensitive components
- Be aware of capacitor discharge hazards
ESD Protection
- Always wear ESD wrist strap when handling sensitive components
- Use ESD-safe mats and containers
- Ground yourself before touching components
Emergency Procedures
- Fire extinguisher location: [TO BE FILLED IN]
- First aid kit location: [TO BE FILLED IN]
- Emergency contact: [TO BE FILLED IN]
